[Gavros247]

They are custom spec by BC forged to match precisely with the Centerbore, offsets, and wheel widths and brake clearances.

What tire size did you go with it you remember?

 

[Cronus251]

Be careful. I put vossen on mine, 21”, but ever since then, the car is making embarrassing noise when I stop. Still trying to figure out if it’s the wheels or the brakes or suspension with the wheel size change. Not very happy right now though.

What were the specs (width and offset)? Do you think maybe it was compression load during braking causing fender rub on the tire? This could also cause a rub of the inside fender liner, etc, during full steering lock.

Edit...after reading through all the posts several times, I'm beginning to think you were sold an insane offset that led to this. Do you have your spec sheet for the order? I remember reading you stated you didn't know all the specs since they just did the "Taycan" setup. But if you have your invoice it should state that.

 

[blraider97]

What were the specs (width and offset)? Do you think maybe it was compression load during braking causing fender rub on the tire?

Edit...after reading through all the posts several times, I'm beginning to think you were sold an insane offset that led to this. Do you have your spec sheet for the order? I remember reading you stated you didn't know all the specs since they just did the "Taycan" setup. But if you have your invoice it should state that.

Vossen put the full specs of the wheels I ordered for my RS6 on the boxes and a sticker on the barrel of the wheel with size and offsets. Shouldn’t be hard to find.

 

[blraider97]

Just orderEd these from BC Forged. Same exact spec (21”) but will be on my Mythos Black RS. I think it’s going to look great. Had 22” Vossen HF-4Ts on order but decided that a fully forged wheel with more sidewall would be best given the weight of the car. Now the wait…..

 

[EricS]

I wanted to order those from the picture above, but in 20s for my winter wheels. BC Forged said they wouldn't fit over the brakes in a 20" size. So now I'm looking at RS5RR | Litespeed Racing | Forged Lightweight Race Wheels

 

[Jaybrew]

Interesting. What's pricing like at litespeed?

 

[EricS]

PRICE | litespeedracing

calculate pricing for our custom wheels with this easy to use pricing calculator

www.litespeedracing.com

Select your wheelsize and scroll down to the bottom to see the price (and add other options if you want but you aren't required to select any options to see the starting price) I was pleasantly surprised.

 

[Gavros247]

My BC Forged wheels are finished and set to be shipped. They ended up turning out great. I’ll post more pics when I have them put on.

 

[Cronus251]

Had the Vossen HF-7 wheels mounted today. Exact same dimension specs as factory but with more flush fitting offset. 21x9.5 front. 21x11.5 rear. Original OEM Goodyear tires. Had custom Audi center caps made to fit the Vossens to give it a more OEM look. No lowering. Pics are of stock suspension set to efficiency mode (lowest ride height). IMO this is how this vehicle should have been specced by Audi in the first place (but I get it that these mesh style wheels aren’t as “aero”). I’ll post better pics when I have some.

sent you a PM

 

[KhaosMotors]

Pictured with AG (Avant Garde) M580-R wheels in Gloss Black. Factory dimensions. Michelin Sport 4S tires

 

[blraider97]

My BC Forged wheels are finished and set to be shipped. They ended up turning out great. I’ll post more pics when I have them put on. View attachment 6125
View attachment 6124

Very nice. How long was it from order to receiving the competition pics? Also, did you go 21” or 22”?

 

[Gavros247]

Very nice. How long was it from order to receiving the competition pics? Also, did you go 21” or 22”?

21s. I was told 6 weeks, ordered them July 13 so 3 week exactly. Not bad at all

 

[ShenEtronGT]

My BC Forged wheels are finished and set to be shipped. They ended up turning out great. I’ll post more pics when I have them put on. View attachment 6125
View attachment 6124

Do you wanna sell your original RS ones?

 

[blraider97]

21s. I was told 6 weeks, ordered them July 13 so 3 week exactly. Not bad at all

Thanks! I am almost to the two week mark and was told my wheels are in production. I also went with 21s but much wider than OEM.

 

[Gavros247]

Thanks! I am almost to the two week mark and was told my wheels are in production. I also went with 21s but much wider than OEM.

What wheels and offset you go with?

 

[blraider97]

What wheels and offset you go with?

The HCA 165S with the exact specs and color option for these wheels which are featured on the BC Forged website landing page. Not sure on specific offsets. Just told them I want that exact set of wheels with the exact fitment, no poke but as flush as possible. Tires will be 295 front and 355 rear, really wide which I like. I don’t care about any hit to range given the larger contact patch. Super excited to get them.

 

[Gavros247]

That back gonna look sick. Post some pics when you get it. 22s? Also are you lowering it?

 

[blraider97]

That back gonna look sick. Post some pics when you get it. 22s? Also are you lowering it?

21s. The set on the BC Forged website are 21s. I like the more meaty sidewall look and feel better about having more sidewall given the weight of the car.

 

[blraider97]

21s. The set on the BC Forged website are 21s. I like the more meaty sidewall look and feel better about having more sidewall given the weight of the car.

And car is already lowered.

 

[Gavros247]

And car is already lowered.

What did you use?>