[will]

Do you mind sharing the steps on how? is this adaptation listed under the Chassis module (74) or elsewhere?

Yes it should be under Chassis module (74) !

 

[will]

It's still a mystery to me how at least one person was able to lower theirs within OBDeleven... I went with ghost links until I can figure that out

 

[will]

No, the values are set while your car is in comfort mode, and the 4 values I listed are for each wheel.

Hey Guido, how do you find the Security Access number? I'm going crazy trying to find it!

 

[will]

FYI, since I lowered my GT I've had a chance to drive the car on put some miles on it with it lowered, and I have decided to lift the car my 10mm.

The reason is, the car's at default let's say it's at 0mm when in efficiency mode it drops -10mm, and if you ever decide to drive the car at over 111mph it will drop an additional 12mm putting it at -22mm.

So if you default to 20mm as I have, when you have at it in efficiency mode the car will drop to -32mm which is too much and you may be damaging the airbags, and if you ever go over 111mph the car will drop another 12mm which puts it at -44mm and you would be driving on your suspension bumper stops which I do not recommend and potentially the car will through fault errors.

So today I will be setting it at -10mm to -12mm at default so that in efficiency it will drop to its operating window set by Audi and I don't think I will be doing 111mph anytime soon.

Awesome intel. I'm going to try this out!