[Fonzie]

You can buy the OBDeleven online for +/- $120, I bought mine on eBay.

Once you receive the OBD11 you will have to download the APP to your phone, then plug it into your OBD port under the car's steering wheel, press the START/STOP button and turn the car to ON and follow the instructions on the APP. and connect to it VIA Bluetooth. REMEMBER YOUR DOORS HAVE TO STAY CLOSED AT ALL TIMES.

Once your phone is connected to the OBD11 it will give you all the car's info. and it will display numerous APPs. of the different functions you can modify on the car.

If you go to OBDeleven.com you will be able to read all about it.

The difficult part is that the APP is half German and half English so you will have to translate it to English, (I used Google)

The lowering of your suspension will be under "Chassis" and it will have a picture of the suspension.

Once you are in the correct part of the APP, go to adaptations, you will have to scroll through the options/headings until you find the suspension values in millimeters. and that's where you will have to make your changes to lower the suspension. EACH WHEEL WILL BE A SEPARATE OPTION/HEADING.

Remember that you need to add the measurement value that you want to lower your car, you DO NOT subtract, you want the car to think it's higher so the inboard computer lowers the car. MAKE SURE YOU ARE ON LEVEL GROUND.

For Example, my suspension values were 400.20, 399.90, 402.30 and 403.80 and i changed them to 420.20, 419.90, 422.30.and 423.80. it will ask you for a code for the OBD11, there are several, but mine worked with 20103 most of the codes can be found online.

Once the values have been inputted you'll need to reset the suspension by scrolling down the options on the same APP, the option is just further down the list in the APP. this will set a FAULT which can be cleared with the OBD11.

Once you have cleared the FAULT go ahead and turn your car off remove the OBD11, once you turn your car on again the suspension will adjust to the new values.

I hope this helps. good luck.

I have no idea how you pulled this off w Google Translate. All the settings are in German but everything I tried to type into Google Translate doesn't match up anywhere close to what's on the app. There are 2 or 3 key steps that I can't find, so I can't proceed.

 

[Fonzie]

I lowered my E-tron with this Tool:

Audi E-Tron 4KE Luftfahrwerk (Audi Adaptive Air Suspension) tieferlegen

Serienmäßiges Luftfahrwerk / Audi Adaptive Air Suspension mittels OBDAPP tieferlegen

www.gg2.shop

Takes minutes. Also has the "Show" option.
In this Picture, I just did a 15 mm drop, may play around with it some more.
Best of all, it has a "Back to Factory" button, just in case .👍
View attachment 6764

Oh, and if anyone needs help with German translation, I am from Germany and speak it fluently.

I'd love to know more. Is it just plugged into OBD port? No sensors or anything need to be installed? Is the application all German?

 

[Fonzie]

Yes, it just plugs in to the OBD Port, then your App connects to it, and you set each Wheel to the desired Hight. Some is in German Language, but most is in English.
🍺

Placing order. Assuming I'm going to need you for some translations so don't go anywhere lol