I think I figured out how to leave it up with OBDEleven!

I'll saying that sharing knowledge is caring

 

Good find. Is this the aerodynamics(6B) module?

 

Found it.

 

Is OBDEleven not in English? I was considering getting it but didn’t realize I would have to deal with translation…

 

Some is. Some isn’t. I didn’t find it to be a huge deal for what I needed to do. It’d certainly be more convenient to find new settings if it was all in English.

 

Thanks. I’ll still get it. Small investment for more control.

Appreciate the note.

 

For anyone using VCDS

It is located in the 6B-Aerodynamics module
Adaptation-10
Channel ENG253383-ENG259784-Spoiler Funktionen-LastMode Funktion
&
Channel ENG253383-ENG259751-Spoiler Funktionen-Manueller Modus Memory Funktion

 

Would anyone know where I could find or happen to have the correct security access login code to adjust the suspension with OBDEleven Pro for a 2024 RS eTron GT? The one that pops up on the app is 20103 but it keeps giving me a ‘Function not available’ error. I reached out to OBDeleven support and they seem to be pretty useless as they seem to ask a lot of questions but don’t really give you any answers. They’re telling me this login code doesn’t seem to be correct however they’re not giving me the correct one. Any help would be appreciated if anyone knows before this gets shipped back to Amazon. Thank you!
Dan

 

it seems like they made it harder on 2024's. Mine is a 2/2024 build datem I cannot access anything accept CAN-BUS module with Ross-Tech/VCDS to do anything.

 

I know this is an old thread but regarding OBDEleven and using it to write stuff, is there some kind of additional credit/subscription you have to buy in addition to the physical thing? https://www.amazon.com/gp/product/B08K94L4JS

 

For what it's worth, my 2024 RS remembers my spoiler position even after a restart.

 

I have more info to provide you guys. You can change the angle of the spoiler with OBD eleven.
It is in the same module. Just look for these settings:
S0 is the default rest position until 90km/h
S1 is the postion from 90km/h
S2 is the position from 170km/h

I liked to have my rear spoiler in a little more upwards condition, I’ve set mine on S0=200 but thinking of maybe setting it at 350/400. This way on the highway the spoiler will retract again a bit to the default level of 263.

Then you can also change the minimum speed level for each of these conditions.
Below you can find the different steps at 0-90-170km/h as you can see the S0,S1, S2 correspond to the levels you configure in the first screenshot.

Here is some general information about the rear spoiler functions: