[pwn2own]

My Q6 have 2117km and air suspension gone.... it's top level of frustration...anyone with the similar experience? It's not false positive it's real issue.

 

[q8canuck]

My Q6 have 2117km and air suspension gone.... it's top level of frustration...anyone with the similar experience? It's not false positive it's real issue.

View attachment 18436

Yes it’s unfortunate to have this happen to a new vehicle but you are lucky. If this happened with no warranty it would be an expensive repair.

 

[mmaslar]

Sounds a bit like Spanx….

For any of those still following along, I have a part number for the BCM. It is 85E-907-031-PJ. Based on the limited information I can find, it appears that it falls under HCP4 (Comfort Domain Controller) but is not the controller itself, but rather a sub controller unit. The part is still on back order, so our Q6 has been on a dolly at the dealership for 52 days now.

 

[Hppy29]

My Q6 have 2117km and air suspension gone.... it's top level of frustration...anyone with the similar experience? It's not false positive it's real issue.

View attachment 18436

I have had this error show twice, left the car overnight and it reset.

 

[dot43]

I have had this error show twice, left the car overnight and it reset.

Same for me

 

[LessThanSte]

View attachment 18067
Have you tried tapping this "Off" button on the bottom left of the screen. That does the trick for me.

Just to follow up on this. Yes, you can press the off button, but that turns the whole a/c system off. So if, for example, you dont want the auto (gentle) a/c blasting you with air, but want some air movement, if you press Off you then have to either press auto to get it back on again, or tap menu and turn up the fan manually. All a faff.

So really what i want is a button which turns off the Auto a/c, and reverts the a/c to a simple fan at whatever temperature is set.

In my old Q5, there was an auto button but there were buttons on the dash to adjust the fan speed up or down. If you adjusted the fan, the auto a/c turned itself off. That seems the logical approach.

Unless im missing something simple?

 

[q8canuck]

Yes buttons on the dash I remember them well. I read recently that the major manufacturers are bringing them back due to customer demand.

The everything controlled by touchscreen crowd is going to be disappointed. They can go buy a Tesla in my opinion.

 

[lozzd]

Does anyone's overhead view (the top-down camera view where the car is superimposed on the image) show black sometimes? It's really hit and miss to when it works / doesn't work.

it's showing a black right hand section because it's gone in to automatic parking assist mode - see the text (easily missable) on the top bar. Thats a different screen to the top-down mode. You'll note there's a large button, top one, just cut off on the top right of your picture - that's the "park assist" button, and in this case it's automatically activated. press it and it'll go back to regular camera mode (top down)

It's supposed to be quite a clever feature - as you drive slowly around, if it thinks it saw a parking space, when you hit reverse it goes in to parking assist automatically and you just tap the "discovered" parking space on the black bit in the right of the screen, and it auto-parks in to that space.

Unfortunately, like most "smart" technology on this car, it is really bad at detecting parking spaces. Reversing on to my drive every 50% of the time would be a "parking space" so I'd lose the top down view while parking - super annoying

The good news is, you can turn off this feature. I forget how exactly - I think when you're in the top down mode, there is a cog button that brings up the settings for parking, and it's something to do with automatic park assist in there. I'll try and remember to look specifically for what it's called tomorrow for you.

 

[mmaslar]

For any of those still following along, I have a part number for the BCM. It is 85E-907-031-PJ. Based on the limited information I can find, it appears that it falls under HCP4 (Comfort Domain Controller) but is not the controller itself, but rather a sub controller unit. The part is still on back order, so our Q6 has been on a dolly at the dealership for 52 days now.

So the module came in, and the dealership installed it; however after replacing it, they were getting new errors, so now we are back to diagnostics with engineering. We may actually get a buyback completed before we ever get our Q6 back.

 

[BenjaminNicholas]

So the module came in, and the dealership installed it; however after replacing it, they were getting new errors, so now we are back to diagnostics with engineering. We may actually get a buyback completed before we ever get our Q6 back.

What's most disappointing about how Audi is handling all of these issues is their silence on it.

I know reporters who have pinged them for comment on stories they're writing and Audi won't even respond.

They're fully ignoring press and also fully gaslighting clients at this point.